Shower cubicle installation is a very simple and straightforward process. They have been designed to be as easy to install as it is possible to be.
There is a slight difference in how they are fitted depending on whether they are being fitted in the corner of a room or in an alcove with walls on three sides. The instructions are in PDF format.
We have two sets of fitting instruction depending on which unit you require – click the image on the left below for an alcove cubicle or the right image if you have a corner or quadrant enclosure:
Shower Cubicle Installation Using An Easy Plumb Kit
The cubicles can be installed flat on the floor. But this will depend on whether the pipe-work can be sunk beneath the floor level. The make-up of the floor and the direction of joists will have a bearing on this. If it is not possible to fit flat on the floor an easy-plumb kit is available. This allows the whole unit to be raised up on legs to enable the pie-work to be run on the surface. It also enables the shower trap to be accessed.
A separate panel is supplied with each easy plumb kit. It is matched to the shower tray shape, size and colour. They are not handed. So if you have a right hand or left hand offset quadrant cubicle the same kit will be suitable.
If you have any queries with any aspect of shower cubicle installation – either our leak-free models or standard units – just give us a ring on 029 2056 0949 and we will be glad to help.